Chapter 2 The Unit Parts; Touch Button Control Panel; Infrared Sensor; Connection Ports - Avermedia AverTV Hybrid STB 1080i User Manual

2.1 Touch Button Control Panel

The Touch Button Panel found on the top side of the unit provides quick access to commonly used functions.

2.2 Infrared Sensor

When using the remote control, aim it at the Infrared Sensor which is located at the front panel of the unit.

2.3 Connection Ports

The port connectors allow connection of your TV antenna, PC, VGA monitor or LCD projector, speakers, video, or
s-video source etc.
The Installation and Setup section provides more information on cable connections.
Chapter 2 The Unit Parts
1
2
3
4
5
Front Panel
Back Panel
ENG-3
Turn the unit on /off
Press this button to toggle
between TV/Video and PC
display
Press Channel
/
and Channel
to the next active TV channel.
Use these buttons to make the
selection in the menu or
picture setting
To call up the menu display /
Set the menu settings
Press Volume
/
increase and Volume
decrease the volume level .
Use these button to adjust the
menu or picture setting
1 S-VIDEO/Y Pb Pr INPUT
2 S-VIDEO OUTPUT
3 Left & Right AUDIO OUTPUT
4 EARPHONE JACK
5 COMPOSITE VIDEO OUPUT
6 Left & Right AUDIO INPUT
7 COMPOSITE VIDEO INPUT
8 Speaker Connection
9 DVI OUTPUT to MONITOR (D-Sub
supported by DVI-I to D-Sub
Adapter)
10 TV Antenna (75Ω)
11 DVI INPUT from PC (D-Sub
supported by DVI-I to D-Sub
Adapter)
12 AUDIO INPUT from PC's SOUND
CARD
13 POWER ADAPTER
User's Manual
to go up
to go down
to
to