Koolaire KY0275W Technician's Handbook page 41

Step 7
Mix a solution of cleaner and warm water.
Depending on the amount of mineral buildup, a larger
quantity of solution may be required. Use the ratio in the
table below to mix enough solution to thoroughly clean
all parts.
Solution Type
Cleaner
Step 8
Use 1/2 of the cleaner/water solution to clean
all components. The cleaner solution will foam when
it contacts lime scale and mineral deposits; once the
foaming stops use a soft bristle brush, sponge or cloth
(not a wire brush) to carefully clean the parts. Soak the
parts for 5 minutes (15 – 20 minutes for heavily scaled
parts). Rinse all components with clean water.
Step 9
While components are soaking, use 1/2 of the
cleaner/water solution to clean all foodzone surfaces of
the ice machine and bin. Use a nylon brush or cloth to
thoroughly clean the following ice machine areas:
• Evaporator plastic parts – including top, bottom
and sides
• Bin bottom, sides and top
Rinse all areas thoroughly with clean water.
Step 10
Mix a solution of sanitizer and warm water.
Solution Type
Sanitizer
Part Number STH047 5/16
Water
1 gal. (4 l)
Water
6 gal. (23 l)
Mixed with
16 oz (500 ml) cleaner
Mixed With
4 oz (120 ml) sanitizer
41