Ice Thickness Check - Koolaire KY0275W Technician's Handbook

CE TH
CKNESS CHECK
The ice thickness probe is factory-set to maintain the ice
bridge thickness at 1/8" (3.2 mm).
NOTE: Make sure the water curtain is in place when
performing this check. It prevents water from splashing
out of the water trough.
1. Inspect the bridge connecting the cubes. It should
be about 1/8" (3.2 mm) thick.
2. If adjustment is necessary, turn the ice thickness
probe adjustment screw clockwise to increase
bridge thickness, or counterclockwise to decrease
bridge thickness.
NOTE: Turning the adjustment 1/3 of a turn will change
the ice thickness about 1/16" (1.5 mm).
1/8"
CE BR
DGE
TH
CKNESS
NOTE:
SV3113
Make sure the ice thickness probe wire and the bracket
do not restrict movement of the probe.
100
ADJUST
NG
SCREW

ce Thickness Check
Part Number STH047 5/16
SV3114