Locomotive switch location continued
Figure 2. Locomotive switch locations
Locomotive switch function overview
Tender switch location
The switches that control the RailSounds features and volume of your locomotive are located
under the hatches on the upper deck of the tender. When you lift up the hatches these
switches are visable with their icons.
Looking down at the tender with the front facing to the right the switches are as follows:
+
OFF
Rear of Tender
WARNING! Do not turn the tender upside down because the
magnets will not hold the upper deck in place
Figure 3. Tender switch locations
71-1155-250 ATSF 3000.indd 9
Whistle and Blowdown switch
Front of Locomotive
Volume UP/DOWN Control Switch
Used to turn the maximum volume up or down.
-
RailSounds ON/OFF Switch
Used to turn off all sounds except whistle and bell. Switch is read
when the locomotive is powered up after it has been powered
down for at least 10 seconds.
ON
Sand dome hatch
9
Rear of Locomotive
Front of Tender
4/28/10 8:35 AM