Mitsubishi Electric PLK-E SERIES Technical Manual page 110

THIS SCREEN WILL SHOW THE STATUS OF THE INPUTS
NEXT SCREEN LOOKS LIKE THIS
THIS SCREEN WILL SHOW THE STATUS OF THE OUTPUTS
IN THIS SCREEN INPUT 2 IS CLOSED
INPUT 1/START PEDAL
INPUT 2/MAIN CLAMP PEDAL
INPUT 4/EMERGENCY STOP BUTTON
NOTE: IF THE ARROW MOVES, THE
INPUT IS WORKING
OTHER INPUTS ARE EXTRA
5. AFTER TESTING, PRESS THE X KEY
6. PRESS THE OUTPUT STATUS KEY
IN THIS SCREEN OUTPUT 4 AND 5 ARE
ON. OUTPUT D AND G ARE ALSO ON
BUT NOT BEING USED
OUTPUT 1/TRIMMER
OUTPUT 2/WIPER
OUTPUT 3/TENSION RELEASE
OUTPUT 4/MAIN CLAMP
OUTPUT 5/PRESSER FOOT
OUTPUT 6/BEEPER
OUTPUT B/FUN 1 (ALSO KNOWN AS REVERSE OR 360)
OUTPUT C/SECOND STAGE CLAMP
OTHER OUTPUTS ARE EXTRA
7. PRESS OUTPUT TEST KEY
108