Related Manuals for Gorenje GC340AC-TG
Summary of Contents for Gorenje GC340AC-TG
- Page 1 Instructions for use, mounting and connection BUILT-IN GAS HOB GCW340AC-TG GC340AC-TG For Town Gas...
- Page 2 Integrated gas cooker Dear Buyer, This electric integrated gas cooker is manufactured for household use. Our appliances are packed in the environmentally friendly materials which may be recycled, deposited or destroyed without any hazard to the environment. Such packaging materials are also labeled accordingly. Once the life cycle your appliance is over, make sure not to pollute the environment, and deliver it to the authorized collectors of old household appliances...
-
Page 3: Safety Precautions
Safety precautions To avoid any possible hazard, the appliance must be installed by qualified personnel only. During the operation of gas burners the room may be filled with extra heat and humidity, so it is necessary to assure adequate ventilation. Occasional opening of the window or door should provide enough exchange of air. -
Page 4: Description Of The Appliance
Description of the appliance Hob surface is made of ceramic glass and is fitted with gas burners and control buttons (depending upon the model). 1. Rear burner 2. Front burner 3. Control buttons 3a. Front burner control button 3b. Rear burner control button 4. -
Page 5: Gas Burner Control
Gas burner control Safety cautions in regard Never use cooking zones without dishes, or for heating the to the cooking zones ambience! Keep the cooktop clean, since dirt and stains have adversary effect on the functionality of burners. If you like your food to be crisp, first set the burner to the maximum and continue cooking at minimum power. - Page 6 Always push the button in before starting to turn it ! To ignite the burner, press the selected burner button and turn it to the maximum power position (large flame symbol). Electric spark from the ignition device ignites the gas. If the electric ignition is out of order (fail of electric power supply or humidity) use for ignition matches or ignitor.
-
Page 7: Cleaning And Maintenance
Cleaning and maintenance The appliance should be cleaned with warm water, liquid detergent and soft cloth. Never use aggressive cleaners and sharp objects. Burned or dried food particles should be moistened with a wet cloth and softened with an appropriate cleansing agent. - Page 8 Pattern marks can be erased by the use of aggressive cleansing agents or rough and damaged cookware bottoms (Fig. 2). Minor stains are removed with moist soft cloth; after that the surface should be wiped dry (Fig. 3). Water stains are removed with gentle vinegar solution, but you must not wipe the frame with it (certain models only), since it may lose its glow.
-
Page 9: Troubleshooting Guide
Troubleshooting guide Repairs must be done by qualified personnel only. Any unskilled attempt to repair the appliance is extremely dangerous. Before attempting any repairs disconnect the appliance from the mains by removing the fuse or unplugging the mains lead from the mains socket. Any unskilled attempts and/or repairs may cause electric shock and short circuit. -
Page 10: Installation Instructions
Installation instructions Caution! To avoid any possible hazard, the appliance may be installed by qualified personnel only. Panels and furniture lining of the kitchen cabinet receiving the hob must be treated with temperature resistant adhesives (100°C), otherwise they might be discoloured or deformed because of inadequate temperature resistance. - Page 11 Only the type EVP4…, ovens with cooling fan can be inserted below gas cooking hob. Prior inserting the oven, it is necessary to remove the rear kitchen element panel in the area of the oven opening. Equally, the front part of the element must have an opening of no less than 6 mm.
- Page 12 Connecting the cooktop to the electricity supply Connections may be carried out by a qualified technician only. The earthing protection must comply with the standing regulations. Connection terminals are revealed when the connection box cover is removed. Prior any attempted connection check that the voltage indicated on the rating plate is in line with your home power supply.
- Page 13 Installation diagram Improper connection may damage parts of the appliance. Such damages are not covered by warranty! Before attempting any connections check whether voltage indicated on the rating plate agrees with the installation in your home. Authorized person must check the user connection voltage (220 - 240 V against N) with the voltage meter! Place the power lead at the rear of the appliance in such way...
-
Page 14: Gas Connection
Gas connection The appliance must be connected in accordance with the Safety precautions standing ragulations, and it may be used only in well ventilated rooms. Before any attempt to connect the appliance read carefully the instructions! These instructions are only valid if country symbol appears on the appliance. - Page 15 Gas connection joint A ISO7-1 R1/2 connection After connection check proper functioning of burners. Gas must burn with clearly displayed blue-green flame hubs. If the flame is not stable, increase minimum power setting. Instruct the user in regard to burner button controls and read the instructions or use together.
-
Page 16: Technical Information
Caution: Above works must be performed only by the registered gas installers! Technical information Model GC340AC-TG GCW340AC-TG Appliance dimensions 48 / 300 / 510 48 / 300 / 510 (height/width/depth)mm... - Page 17 WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO INFLUENCE ON THE OPERATION OF THE APPLIANCE.
- Page 18 SAP 336788 VD DOMINO GC340AC-TG, GCW340AC-TG / GB / HK 2012 06 05 /...
Need help?
Do you have a question about the GC340AC-TG and is the answer not in the manual?
Questions and answers