Table of Contents
Advertisement
\
9
/
OPERATING YOUR NEW RHFE-556FDT
n
TO OPEN THE CONTROL PANEL
Using a finger, pull door lightly
forward from the
centre
catch
point on the left hand side of the
control
panel cover.
The control
panel cover
will open forward
to an angle.
n
TURNING ON
Press
the
ON/OFF
button
to
operate
the
heater.
The
ON
indicator
will
glow
green.
After
approximately
20
seconds
the
spark
generator
will
be
heard
before
the
burner
ignites
and
the
ON
indicator
glows
red,
indicating
that the burner
is alight.
Warm air
can
be
felt
coming
from
the
louvres
approximately
15 seconds
later.
Power ON/Combustion
indicator
1 Filter Indicator
If the heater does not ignite on initial
use, this may be due to air remaining
in the gas supply
line, and the temperature
display will flash. The spark generator
will only continue
for 15 seconds.
After this it will be necessary
to press the ON/OFF
button,
then ON again.
n TURNING OFF
Power ON/Combustion
Indicator
Simply
press the ON/OFF
button
to switch
off
the h-t%er.
The 0,Windicator
will go out. The
convection
fan will
continue
to operate
for
several
minutes
after the burner has gone out
in order to cool the appliance. Do not unplug
the appliance
while the convection
fan is
running.
Filter Indicator
f
DO NOT turn heater off by unplugging at the power point.
The convection fan will continue to run until the appliance cools.
7
-9-
Hide quick links:
Advertisement
Table of Contents
