Do you have a question about the Energysaver RHFE-556 FTR and is the answer not in the manual?
Questions and answers
Vincenzo
March 10, 2025
Si accendono tutti le spie **** premo accensione non si accende
1 comments:
Mr. Anderson
March 10, 2025
The document does not provide specific troubleshooting steps for the RHFE-556 FTR not turning on when the ignition button is pressed. However, based on the provided information, possible causes could include incorrect manifold pressure settings, gas supply issues, or a fault in the ignition system. Checking and adjusting the manifold pressure, ensuring the gas supply is on, and verifying that no safety features are preventing ignition may help diagnose the problem.
This answer is automatically generated
Vincenzo
March 10, 2025
Il mio rebus si accendono tutte le spie ma quando premo accensione non parte
1 comments:
Mr. Anderson
March 10, 2025
The Rinnai Energysaver RHFE-556 FTR may turn on all the lights but not start due to improper manifold pressure settings, especially if installed at high altitude. If the unit is installed above 2000 ft (610 m) and uses propane gas, it is not recommended for such elevations. Additionally, incorrect pressure settings for the altitude may prevent proper operation. Checking and adjusting the manifold pressure according to the installation height, as described in the manual, may resolve the issue.
This answer is automatically generated
Subscribe to Our Youtube Channel
Related Manuals for Rinnai Energysaver RHFE-556 FTR
Need help?
Do you have a question about the Energysaver RHFE-556 FTR and is the answer not in the manual?
Questions and answers
Si accendono tutti le spie **** premo accensione non si accende
The document does not provide specific troubleshooting steps for the RHFE-556 FTR not turning on when the ignition button is pressed. However, based on the provided information, possible causes could include incorrect manifold pressure settings, gas supply issues, or a fault in the ignition system. Checking and adjusting the manifold pressure, ensuring the gas supply is on, and verifying that no safety features are preventing ignition may help diagnose the problem.
This answer is automatically generated
Il mio rebus si accendono tutte le spie ma quando premo accensione non parte
The Rinnai Energysaver RHFE-556 FTR may turn on all the lights but not start due to improper manifold pressure settings, especially if installed at high altitude. If the unit is installed above 2000 ft (610 m) and uses propane gas, it is not recommended for such elevations. Additionally, incorrect pressure settings for the altitude may prevent proper operation. Checking and adjusting the manifold pressure according to the installation height, as described in the manual, may resolve the issue.
This answer is automatically generated