Controls - Siemens TE502 series Instruction Manual

Controls

Power on/off switch O / I
The power switch O / I (9) is used to switch
the appliance on or to switch it off fully
(power supply off)�
Important: Before switching off, run the
cleaning programme or use the
button (12) to switch off�
e
j
off / button
e
j
When the off / button (12) is pressed
briefly, the appliance rinses and switches
off� Pressing and holding down the
button (12) displays the user settings or
starts the descaling and cleaning function�
h
button
h
Press the button (11) to generate steam
for preparing milk froth�
start button
Press the start button (10) to begin drink
preparation or to start a service programme�
Press the start button (10) again during
drink preparation to cut the dispensing
process short�
"Coffee strength" rotary knob
This rotary knob (13) is used
to set the coffee strength�
h
Very mild
Mild
Mild +
to
Normal
Normal +
g
Strong
"Drink selection" rotary knob
e
j
off /
e
j
off /
N.B.: If a drink is selected that cannot be
prepared,
the display� Change the coffee strength or
the selected drink�
Milk frother
Pull the milk frother (6) out to open it and
push it back in to close it�
This rotary knob (14) is used
to select the required drink
and the per-cup quantity� It
is also used to change user
settings�
a
Small Espresso
Espresso
Small Café Crème
to
Café Crème
c
Large Café Crème
b
2 small Espresso
2 Espresso
2 small Café Crème
to
2 Café Crème
d
2 large Café Crème
e
Rinse machine
f
Rinse milk system
Invalid combination
en
appears in
25