Computer Connections; Serial (Rs-232) Interface Requirements - Argox amigo series User Manual

Computer Connections

Note: You must insert the power supply's barrel connector into
the power jack on the back of the printer before
connecting communication cables.
This printer comes with a nine-pin Electronics Industries
Association (EIA) RS-232 serial data interface, a standard
Centronics parallel interface and a USB interface (except the
A-150 model). You must supply the required interface cable for
your application.
Note: This printer complies with FCC Rules and Regulations,
Part 15, for Class A Equipment, for use with fully shielded
six-foot data cables. Use of longer cables or unshielded
cables may increase radiated emissions above Class A
limits.

Serial (RS-232) Interface Requirements

The required cable must have a nine-pin "D" type male connector
on one end, which is plugged into the mating serial port located
on the back of the printer. The other end of the signal interface
cable connects to a serial port on the host computer.
For technical and pin-out information, please refer to the
Technical Reference, Interface Specifications in this manual.
35 36