Computer Connections; Usb Interface Requirements; Serial (Rs-232) Interface Requirements - Argox OS-314plus User Manual

Hide thumbs Also See for OS-314plus:

Table of Contents

Enlarged version

Computer Connections

Note: You must insert the power supply's barrel connector into

the power jack on the back of the printer before

connecting communication cables.

This printer comes with a nine-pin Electronics Industries

Association (EIA) RS-232 serial data interface and a USB

interface. You must supply the required interface cable for your

application.

Note: This printer complies with FCC Rules and Regulations,

Part 15, for Class A Equipment, for use with fully shielded

six-foot data cables. Use of longer cables or unshielded

cables may increase radiated emissions above Class A

limits.

The Universal Serial Bus (USB) interface is version 2.0 and 1.1

compliant and provides a full-speed (12Mb/s) interface that is

compatible with your existing PC hardware. The USB's "plug and

play" design makes installation easy. Multiple printers can share a

single USB port/hub.

The required cable must have a nine-pin "D" type male connector

on one end, which is plugged into the mating serial port located

on the back of the printer. The other end of the signal interface

cable connects to a serial port on the host computer.

For technical and pin-out information, please refer to the

Reference Technical Information, Interface Specification.

USB Port

Parallel Port

OS-314plus

RS-232 Serial

Port

Power Jack

Table of Contents