Controls & Connections; Self-Test Before Connecting - Argox AME-3230B User Manual

Controls & Connections

Self-Test before Connecting

After the Battery is charged and media is loaded, before connecting
the printer to a computer or a portable data terminal, perform a printer
self-test label to verify that the printer works properly:
Printing a Self-Test Label

Press the Power Switch to turn off the printer.

Make sure the Battery is installed, and media is loaded.

Press and hold the Feed Button, and then press the Power
Switch to turn on the printer

Power LED will then become lit, release the Power Button.

After the printer stars to print, release the Feed Button.

Wait until printer finishes printing, press the Power Switch or
Feed Button to resume normal printing mode.
.
Note:
printouts,
For more information on self-test
Troubleshooting – Printing a Configuration Report
AME Series User's Manual
23