Recalling A Registered Panel Setup - Yamaha CVP-709 Owner's Manual

Recalling a Registered Panel Setup

The saved Registration Memory Bank files can be recalled by using the REGIST BANK [-]/[+] buttons or
the following procedure.
NOTE
• When recalling setups that include Song, Style or text files selected from a USB flash drive, make sure that the appropriate USB flash
drive containing the registered Song, Style or text is connected into the [USB TO DEVICE] terminal.
• Before using a USB flash drive, be sure to read "Connecting USB Devices" on page 97.
• You can also call up the eight setups by using pedals in any order you specify via [Menu]  [RegistSeq]. For details, refer to the
Reference Manual on the website (page 9).
1
Call up the Registration Bank Selection display (step 1 on page 89).
2
Touch and select the desired Bank on the display.
You can also use the REGIST BANK [-]/[+] buttons to select a Bank.
3
Press one of the green-lit numbered buttons ([1] – [8]) in the Registration Memory
section.
Confirming the Registration Memory Information
You can call up the information display to confirm which Voices and Style are memorized to the [1] – [8]
buttons of a Registration Memory Bank.
1
Call up the Registration Bank Selection display, then select the desired Bank.
2
Touch
This display consists of two pages: Voice-related and Style-related. You can alternate between
the two via []/[].
NOTE
If a certain Voice part is set to off, the Voice name for the corresponding part is shown in gray.
To change the name of the selected Registration, touch
Registration, touch
Naming the Registration Memory data
If you have created a wide variety of Registration Setups, it may be difficult to find the one desired for
your particular live performance situation.
To remedy this, it is good idea to assign names to both the Registration Memory Bank and its
Registration Setups individually.
90 CVP-709/CVP-705 Owner's Manual
(Information) to call up the Registration Information window.
(Delete).
For switching the pages.
(Rename). To delete the selected