Applying Vocal Harmony Effects To Your Voice - Yamaha CVP-709 Owner's Manual

Applying Vocal Harmony Effects to Your Voice

The Vocal Harmony feature lets you add harmonies to your singing voice, input via the microphone sound.
1
Connect the microphone to the instrument (page 82).
2
Call up the Vocal Harmony display via [Menu] → [VocalHarmony].
NOTE
The display shown at left is called up when the Harmony Mode is set to "Vocoder." A different display appears when the
Harmony Mode is set to "Chordal."
3
Make sure that Harmony is set to "On."
4
Touch the Vocal Harmony name to call up the Vocal Harmony Selection display.
5
Select a Vocal Harmony type.
The Vocal Harmony features three different Modes which can be selected automatically by
selecting a Vocal Harmony type.
Harmony mode
Chordal
Vocoder
Vocoder-Mono
Icons shown in the Vocal Harmony Selection display indicate the following meanings.
(Blue/pink)
(Gray)
3
The harmony notes are determined by the chords you play in the chord section
(with [ACMP ON/OFF] turned on), the left hand section (with [ACMP ON/
OFF] turned off and the Left part turned on) or chord data of Song.
The microphone sound is output via the notes you play on the keyboard or the
Song playback notes.
Same as the Vocoder basically. In this mode, only single-note melodies or lines
can be played back (with last-note priority).
Vocal Harmony Type of Chordal Mode
In general, blue icon types are to be used by male singers, and pink by female singers.
Vocal Harmony Type of Vocoder Mode
Vocal Harmony Type having unusual effects, such as a robotic voice.
Vocal Harmony Type without any effect.
6-1
(When the Mode is set to "Vocoder" or "Vocoder Mono")
CVP-709/CVP-705 Owner's Manual
4
Vocal Harmony name
Mode
83