Table of Contents
Advertisement
Menu
Song Creator
Tune
Piano
Voice
Voice Set
Setting
Setting
Setting
Style
Setting
Change
Behavior
Guide
Part Ch
Song
Lyrics
Setting
Play
Rec
Master Tune
Tuning
Scale Tune
Keyboard Setting
Metronome
Metronome
Setting
Tap Tempo
System
Transmit
Receive
MIDI Setting
On Bass Note
Chord Detect
Speaker/
Connectivity
Display/
Touch Screen
Parameter Lock
Utility
USB Flash Drive
System
Factory Reset/
Backup
Wireless LAN Settings*
Time*
* These icons appear only when the USB wireless LAN adaptor (if included) has been connected once.
Description
Lets you create a Song by editing an existing recorded Song.
For adjusting the pitch for each keyboard part (Main/Layer/Left).
For editing the parameters of the piano Voices, including the VRM Voices.
Determines which settings (effects, etc.) linked to the Voices are not called
up when selecting a Voice.
Determines how the Voice Selection display is opened when one of the
VOICE category buttons is pressed. Also determines whether to add
articulation effects or not when selecting an S.Art2 Voice (CVP-709 only).
For editing parameters for Style playback such as Stop Accompaniment
and OTS Link Timing.
Determines the Style condition (sections, tempo, etc.) when selecting a
different Style.
For selecting the type of the Guide function, or changes the guide lamp
settings.
Determines which MIDI channel in the Song data is used for the right-hand/
left-hand part.
Determines the language of the displayed lyrics.
For editing parameters for Song playback such as Repeat Playback and the
Performance Assistant Technology.
For editing parameters for re-recording of MIDI Songs, or setting the file
format for Audio recording.
For fine-tuning the pitch of the entire instrument in approx. 0.2 Hz steps.
For selecting the scale type and tuning the pitch of the desired note (key) in
cents.
Determines the Touch Response of the keyboard, or turns the Left Hold
function on/off.
Determines the metronome volume, sound and time signature.
Determines the volume and sound type of the sound caused when the [TAP
TEMPO] button is pressed.
For editing the parameters for MIDI system messages.
For editing the parameters for MIDI transmission.
For editing the parameters for MIDI reception.
Determines the bass note for Style playback based on the note messages
received via MIDI.
Determines the chord type for Style playback based on the note messages
received via MIDI.
For making the settings for the instrument's speakers and the external
monitor.
For editing the parameters for the display settings, such as the theme of the
home display, brightness, and touch panel calibration.
Determines which parameters (effect, Split Point, etc.) will not be changed
when the panel setups are changed via Registration Memory.
Indicates the capacity of the connected USB flash drive or allows you to
format it.
Indicates the firmware version of this instrument, and lets you make basic
settings, such as the language for the display and voice guide.
For initializing the instrument to the factory default, or backing up the data
stored in the instrument.
For making settings for connecting the instrument to a smart device such as
iPad via a USB wireless LAN adaptor.
For making settings of the time shown on the display.
Pages
–
–
–
–
–
40
–
–
95
–
98
22
42
–
–
CVP-709/CVP-705 Owner's Manual
101
Advertisement
Table of Contents
