Creating Original Organ Flutes Voices - Yamaha CLAVINOVA CVP-701 Owner's Manual

Creating Original Organ Flutes Voices

The instrument uses advanced digital technology to recreate the legendary sound of vintage organs. Just as
on a traditional organ, you can create your own sound by increasing and decreasing the levels of the flute
footages.
1
Press the [ORGAN FLUTES] button.
The FOOTAGE Page of the Organ Flutes Voice is called up.
2
Use the [1] – [8] buttons to adjust the footage settings.
The [1] buttons control two footages: 16' and 5 1/3'. Pressing the [D] button switches
between these two footages.
What is "Footage"?
Footage is a number (16', 8', etc.) displayed at the bottom of each footage lever. The number indicates the length of pipes used on
an actual pipe organ, which determines the pitch of the sound. The number 8' indicates a pipe length of 8 feet, while 4' indicates 4
feet, which creates a pitch one octave higher than 8'. Similarly, the number 16' indicates 16 feet, whose pitch is one octave lower
than 8'.
1
2
2
If you want, you can select the Organ type, change the Rotary Speaker speed and adjust the
Vibrato setting, by using the [A] – [C] and [F] – [H] buttons.
1
[A]/[B]
2
[C]
ORGAN TYPE Specifies the type of organ tone generation to be simulated:
Sine or Vintage.
Alternately switches between the slow and fast rotary speaker
ROTARY SP
SPEED speeds when an effect which contains "Rotary" or "Rot" in its
name is selected for the Organ Flutes (DSP TYPE parameter
in the EFFECT/EQ Page), and the DSP is turned on (page 52).
3
4
5
Footage levers
53
CVP-701 Owner's Manual
2