Creating Your Original Organ Flutes Voices - Yamaha Clavinova CVP-401 Owner's Manual

Voice Creating (Sound Creator)
100 CVP-405/403/401 Owner's Manual
2. DSP
DSP TYPE Selects the DSP effect category and type. Select a type after select-
ing a category.
VARIATION Two variations are provided for each DSP type.
Here, you can edit the VARIATION on/off status and variation-
parameter value setting.
ON/OFF
The factory-programmed assignments are set to variation-off for
all Voices (standard variation of DSP is assigned). If you select
VARIATION ON here, a variation of the DSP effect is assigned to
the Voice. The variation parameter value can be adjusted in the
VALUE menu explained below.
PARAMETER
Displays the variation parameter.
VALUE
Adjusts the value of the DSP variation parameter.
3. EQ
EQ LOW/HIGH These determine the Frequency and Gain of the Low and High EQ
bands.
HARMONY
Harmony sets the Right 1 and 2 parts together. Select the Right 1 part (page 32,
step 1) in the Main display, before you set it.
This has the same settings as the display of "Selecting the Harmony/Echo type" on
page 86 in step 1.

Creating Your Original Organ Flutes Voices

The instrument features a variety of lush, dynamic organ Voices that you can call up
with the [ORGAN FLUTES] button. It also gives you the tools to create your own
original organ sounds by using the Sound Creator function. Just as on a traditional
organ, you can create your own sounds by adjusting the levels of the flute footages.
Basic Procedure
1
Select the desired Organ Flutes Voice to be edited (page 32).
2
In the ORGAN FLUTES Voice Selection display, press the [6 π
AGE) button to call up the SOUND CREATOR [ORGAN FLUTES] dis-
play.
π ] (FOOT-
π
π