Table of Contents
Advertisement
6
Rotate the adjuster until it comes in firm
contact with the floor surface.
7
Attach the headphone hanger.
Attach the headphone hanger using two screws K as
shown in the illustration.
K
After completing the assembly, please
check the following.
• Are there any parts left over?
→ Review the assembly procedure and correct any
errors.
• Is the instrument clear of doors and other
movable fixtures?
→ Move the instrument to an appropriate location.
• Does the instrument make a rattling noise
when you shake it?
→ Tighten all screws.
• Does the pedal box rattle or give way when you
step on the pedals?
→ Turn the adjuster so that it is set firmly against
the floor.
• Are the pedal and power cords inserted
securely into the sockets?
→ Check the connection.
CAUTION
If the unit creaks or is otherwise unsteady when you play on
the keyboard, refer to the assembly diagrams and retighten all
screws.
When moving the instrument after assembly, always
hold the bottom of the main unit.
CAUTION
When moving the instrument, always hold the bottom of the
main unit. Do not hold the key cover or top portion. Improper
handling can result in damage to the instrument or personal
injury.
Do not hold here.
Hold here.
115
CVP-701 Owner's Manual
Advertisement
Table of Contents
