Creating Your Original Organ Flutes Voices - Yamaha PSR-S950 Owner's Manual

Creating Your Original Organ Flutes Voices

You can create original Organ Flutes Voices by editing the Preset Organ Flutes
Voices. Just as on a traditional organ, the original Voices can be created by
increasing and decreasing the levels of the flute footages. The created Voices can be
saved and called up anytime.
1
Press the [ORGAN FLUTES] button.
The FOOTAGE Page of the Voice Set display of the Organ Flutes Voice is
called up.
2
Use the [1 ] – [8 ] buttons to adjust the footage settings.
The footage settings determine the basic sound of the Organ Flutes.
The [1 ] buttons control two footages: 16' and 5 1/3'. Pressing the [D]
button switches between these two footages.
If you want, you can select the Organ type, change the Rotary Speaker speed
and adjust the Vibrato setting, by using the [A] – [C] and [F] – [H] buttons.
[A]/[B] ORGAN TYPE
[C] ROTARY SP
SPEED
[F]/[G] VIBRATO
[H] VIBRATO
DEPTH
[I] PRESETS
NEXT PAGE
For details on the VOLUME/ATTACK Page and EFFECT/EQ
Page, see the Reference Manual on the website.
Specifies the type of organ tone generation to be simulated. Sine produces a clean,
clear sound and Vintage produces a gritty, slightly distorted sound.
Alternately switches between the slow and fast rotary speaker speeds when a
rotary speaker effect is selected for the Organ Flutes (DSP TYPE parameter in the
EFFECT/EQ Page), and the VOICE CONTROL [DSP] button is turned on.
Alternately turns the vibrato effect for the Organ Flutes Voice ON or OFF.
Sets the Vibrato depth to one of three levels:
1 (low), 2 (mid), or 3 (high).
Opens the File Selection display of the Organ Flutes Voices for selecting a preset
Organ Flutes Voice.
NOTE
The term "footage" is a reference to the
sound generation of traditional pipe
organs, in which the sound is pro-
duced by pipes of different lengths (in
feet).
PSR-S950/S750 Owner's Manual
1
41