Creating Your Original Organ Flutes Voices - Yamaha PSR-S775 Owner's Manual

Hide thumbs Also See for PSR-S775:
Table of Contents

Advertisement

Creating Your Original Organ Flutes Voices

You can create original Organ Flutes Voices by editing the preset Organ Flutes
Voices. Just as on a traditional organ, the original Voices can be created by
increasing and decreasing the levels of the flute footages. The created Voices can be
saved to internal memory (USER drive) or a USB flash drive for future recall.
1
Press the [ORGAN FLUTES] button.
The FOOTAGE page of the Voice Set display of the last selected Organ Flutes
Voice is called up.
If you want to edit another preset Organ Flutes Voice, press the [I] (PRESETS)
button to call up the Organ Flutes Voice Selection display, and select as desired.
Then, press the [5 ] (VOICE SET) button to return to the Voice Set display.
2
Use the [1 ] – [8 ] buttons to adjust the footage settings.
The footage settings determine the basic sound of the Organ Flutes.
The [1 ] buttons control two footages: 16' and 5 1/3'. Pressing the [D]
button switches between these two footages.
If you want, you can select the Organ type and change other settings, such as
Rotary Speaker and Vibrato.
[A]/[B]
ORGAN TYPE
[C]
ROTARY SP
SPEED
[F]/[G]
VIBRATO
[H]
VIBRATO
DEPTH
NEXT PAGE
For details on the VOLUME/ATTACK Page and EFFECT/EQ
Page, see the Reference Manual on the website.
Specifies the type of organ tone generation to be simulated.
SINE: Produces a clean, clear sound.
VINTAGE: Produces a gritty, slightly distorted sound.
EURO (PSR-S975 only): Produces the sound of the transistor electronic organ
equipped with the electronic tremolo.
Alternately switches between the slow and fast rotary speaker speeds when a rotary
speaker effect is selected for the Organ Flutes (DSP TYPE parameter in the
EFFECT/EQ Page), and the VOICE EFFECT [DSP] button is turned on.
Alternately turns the vibrato effect for the Organ Flutes Voice ON or OFF.
Sets the Vibrato depth to one of three levels:
1 (low), 2 (mid), or 3 (high).
NOTE
The term "footage" is a reference to the
sound generation of traditional pipe
organs, in which the sound is pro-
duced by pipes of different lengths (in
feet).
NOTE
Pressing the [D] button while holding
down one of the [1 ] buttons can
select both two footages, and lets you
set the same value for them by using
the Data dial.
3
PSR-S975/S775 Owner's Manual
1
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psr-s975

Table of Contents