Changing The Split Points - Yamaha CLAVINOVA CVP-701 Owner's Manual

Changing the Split Points

These are the settings (two Split Points) that separate the different sections of the keyboard: the Chord
section, the LEFT part section and the RIGHT1 and 2 section. The two Split Point settings (below) are
specified as note names.
1
Call up the operation display.
[FUNCTION] → TAB [L][R] MENU1 → [A] SPLIT POINT/CHORD FINGERING →
TAB [L][R] SPLIT POINT
2
Set the Split Point.
Select the desired Split Point by pressing the corresponding [F]-[H] buttons, then rotate the dial
to set the value. Selecting "STYLE+LEFT" sets the Split Point (STYLE) and Split Point (LEFT)
to the same note while "STYLE" and "LEFT" lets you set each Split Point independently.
NOTE
• Split Point (LEFT) cannot be set lower than Split Point (STYLE).
• If you set the CHORD DETECTION AREA value to "UPPER" via the [1]/[ 2] button on the Split Point display, the Chord
section will be at the right side of the Split Point (L). With this setting, pressing the [E] button turns the MANUAL BASS function on,
letting you play the bass line with your left hand while using your right hand to control Style playback. For details, refer to the
Reference Manual on the website (page 9.)
Split Point (STYLE)
Voice LEFT
Chord section
Split Point (LEFT)
Voice RIGHT1 – 2
69
CVP-701 Owner's Manual
3