Recalling Custom Panel Setups; Registering Your Panel Setups - Yamaha CLAVINOVA CVP-701 Owner's Manual

Registration Memory
– Saving and Recalling Custom Panel Setups –

Registering Your Panel Setups

1
Set up the panel controls (such as Voice, Style, effects, and so on) as desired.
Refer to the separate Data List for a list of parameters that can be registered with the
Registration Memory function.
2
Press the [MEMORY] button in the REGISTRATION MEMORY section.
The display for selecting the items to be registered appears.
3
Select the items you want to register.
Select the desired item by using the [1] – [6] buttons, then enter or remove the
checkmark by using the [7]/[8] (MARK ON) / [7]/[8] (MARK OFF) buttons.
To cancel the operation, press the [I] (CANCEL) button.
4
Press one of the REGISTRATION MEMORY [1] – [8] buttons to which you
wish to memorize the panel setup.
The memorized button becomes red, which indicates the number button contains data and its
number is selected.
NOTICE
If you select the button whose lamp is lit in red or green here, the panel setup previously memorized to the button will be
erased and replaced by the new settings.
2
The Registration Memory function allows you
to save (or "register") virtually all panel settings
to a Registration Memory button, and then
instantly recall your custom panel settings by
simply pressing a single button. The registered
settings for eight Registration Memory buttons
should be saved as a single Bank (file).
3
97
CVP-701 Owner's Manual
9