Table of Contents
Advertisement
KX-MB2230EU/ KX-MB2270EU/ KX-MB2515EU/ KX-MB2545EU/ KX-MB2575EU/ DP-MB310EU
CROSS REFERENCE:
FAN Motor Section (P.65)
When the recording paper jam is occurred, the service mode *630 distinguishes the cause.
0:No Jam
1:Exit Sensor turns ON, though not under the conditions for ON.
2:Exit Sensor turns OFF, though not under the conditions for OFF.
3:After Exit Sensor falls, it turns ON already on terminating of Cancel Timer.
4:After Exit Sensor rises, it turns ON already on terminating of Cancel Timer.
5:Top Sensor turns ON, though not under the conditions for ON.
6:Top Sensor turns OFF, though not under the conditions for OFF.
7:After Top Sensor falls, it turns ON already on terminating of Cancel Timer.
8:After Top Sensor rises, it turns OFF already on terminating of Cancel Timer.
9:Exit Sensor never turns ON in the specified time, though Top Sensor turns ON.
10:Top Sensor MAX-length-JAM.
11:Exit Sensor never turns OFF in the specified time, though Top Sensor turns OFF.
12:Registration Sensor turns ON, though not under the conditions for ON.
13:Registration Sensor turns OFF, though not under the conditions for OFF.
14:After Registration Sensor falls, it turns ON already on terminating of Cancel Timer.
15:After Registration Sensor rises, it turns OFF already on terminating of Cancel Timer.
16:Top Sensor never turns ON in the specified time, though Registration Sensor turns ON.
17:Registration Sensor MAX-length-JAM.
18:Top Sensor never turns OFF in the specified time, though Registration Sensor turns OFF.
99:Before Motor Rotation, one of sensors turn ON.
12.3.7.6. Back Side of The Recording Paper is Dirty
CROSS REFERENCE:
High Voltage Section (P.251)
208
Advertisement
Table of Contents
Troubleshooting
