Table 3. Security menu items (continued)
Menu item
Submenu item
Password at
Unattended boot
Password at Restart
Password at Boot
Device List
Password Count
Exceeded Error
Set Minimum Length
Power-On Password
Hard Disk 1
Password
Value
Comments
• Disabled
If you select and enable Password at
unattended boot, a password prompt is
• Enabled
displayed when the computer is turned on, from
either a power-off state or hibernation state, by
an unattended event such as a Wake on LAN
attempt. If you select Disabled, no password
prompt is displayed; the computer goes ahead
and loads the operating system. To prevent
unauthorized access, set the user authentication
on the operating system.
• Disabled
If you select and enable Password at restart,
a password prompt is displayed when you
• Enabled
restart the computer. If you select Disabled, no
password prompt is displayed; the computer
goes ahead and loads the operating system.
To prevent unauthorized access, set the user
authentication on the operating system.
• Disabled
If the Security password is set, this option is
used to specify whether the Security password
• Enabled
must be entered to display the F12 boot device
list. Select Enabled to prompt for the Security
password. Select Disabled to proceed without
any user action required.
• Disabled
Select Enabled to show the POST 0199 error
and prompt for the Security password. Select
• Enabled
Disabled to hide the POST 0199 error and
proceed without any user action required.
• Disabled
Specify a minimum length for power-on
passwords and hard disk passwords. If you
• x characters
set the supervisor password and specify a
(4≤x≤12)
minimum length for passwords, no one but you
can change the length.
• Disabled
For more information, see "Power-on password"
on page 59.
• Enabled
• Disabled
Hard Disk Password prevents unauthorized
users from accessing the data on the storage
• Enabled
drive. In addition to the user password, an
optional Master password can be used to give
access to an administrator.
To have a beep sound when the system is
waiting for this password, enable the Password
Beep feature in the Alarm submenu.
For more information, see "Hard disk
passwords" on page 61.
.
Chapter 6
Advanced configuration
81