Lenovo ThinkPad T560 User Manual page 91

Table 2. Config menu items
Menu item
Network
Submenu item
Wake On LAN
Ethernet LAN Option ROM
(for Legacy Only boot
mode or Both with Legacy
first)
UEFI IPv4 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
UEFI IPv6 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
UEFI PXE Boot Priority
(for UEFI Only boot mode
and Both boot mode with
UEFI first boot mode, and
IPv6 and IPv4 stacks are
both enabled.)
Value
• Disabled
• AC only
• AC and Battery
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• IPv6 First
• IPv4 First
Chapter 6
Comments
Enable the computer to
power on when the Ethernet
controller receives a magic
packet (a special network
message).
If you select AC Only, Wake
on LAN function is enabled
only when the ac power
adapter is attached.
If you select AC and
Battery, Wake on LAN
function is enabled with any
power sources.
Notes:
• The magic packet type
Wake on LAN requires ac
power.
• The Wake on LAN
function does not
work when a hard disk
password is set.
Load the Ethernet LAN
Option ROM to enable
startup from an integrated
network device.
Enable or disable Internet
Protocol Version 4 (IPv4)
network stack for UEFI
environment.
Enable or disable Internet
Protocol Version 6 (IPv6)
network stack for UEFI
environment.
Select network stack priority
for UEFI PXE boot.
.
Advanced configuration
75