Installing Device Drivers; Using The Thinkpad Setup Program - Lenovo ThinkPad T560 User Manual

When you install the Windows 10 operating system, you might need one of the following country or region
codes:
Country or region
China
Denmark
Finland
France
Germany
Italy
Japan

Installing device drivers

Device driver is the program that operates a particular hardware device of the computer. If a device does
not perform well or you install a new device, you need to install or update the corresponding device driver.
For example, if you use the Windows 7 operating system, to use the USB 3.0 connector, you need to
download and install the USB 3.0 driver.
To download the latest device drivers, do the following:
1. Go to http://www.lenovo.com/ThinkPadDrivers.
2. Select your product name to view all the device drivers for your computer.
3. Select the device drivers you that you need, and follow the instructions on the screen.
Attention: Do not download the device drivers from the Windows Update Web. Always download the device
drivers from:
http://www.lenovo.com/ThinkPadDrivers
If you use the Windows 7 operating system, you also can find the device drivers in the C:\SWTOOLS\DRIVERS
directory on your storage drive. For more information, see "Reinstalling preinstalled programs and device
drivers" on page 117.

Using the ThinkPad Setup program

The ThinkPad Setup program enables you to select various setup configurations for your computer through
configuring the BIOS.
To configure the BIOS of your computer, do the following:
1. Restart the computer. When the logo screen is displayed, press F1 to start the ThinkPad Setup program.
If you are required to enter the supervisor password, enter the correct password. You also can press
Enter to skip the password prompt and start the ThinkPad Setup program. If you do not enter the
password, you cannot change the configurations that are protected by the supervisor password. For
more information, refer to "Using passwords" on page 59.
2. Use the cursor keys to select a tab; or use the cursor keys to locate an item and press Enter to select it.
Then a submenu is displayed.
Note: Some menu items are displayed only if the computer supports the corresponding features.
3. Set the value of an item by doing one of the following:
• Press the F6 key to change to a higher value.
Code
SC
DK
FI
FR
GR
IT
JP
Country or region
Netherlands
Norway
Spain
Sweden
Taiwan and Hong Kong
United States
Chapter 6
Code
NL
NO
SP
SV
TC
US
.
Advanced configuration
73