Product Overview - Stanley SCL Instructions Manual

GB
Contents
• Safety

• Product Overview

• Keypad, Modes, and LED
• Batteries and Power
• Set Up
• Operation
• Applications
• Accuracy Check and Calibration
• Specifi cations
User Safety
WARNING:
• Carefully read the Safety Instructions and
Product Manual before using this product.
The person responsible for the instrument must
ensure that all users understand and adhere to
these instructions.
CAUTION:
• While the laser tool is in operation, be careful
not to expose your eyes to the emitting laser
beam (red light source). Exposure to a laser
beam for an extended time may be hazardous
to your eyes.
CAUTION:
• Glasses may be supplied in some of the laser
tool kits. These are NOT certifi ed safety glasses.
These glasses are ONLY used to enhance the
visibility of the beam in brighter environments or
at greater distances from laser source.
Retain all sections of the manual for future reference.
8
WARNING:
• The following label samples are placed on
your laser tool to inform of the laser class for
your convenience and safety. Please reference
the Product Manual for the specifi cs on a
particular product model.
EN 60825-1
Product Overview
Figure A -
Laser Tool
1. 1/4 - 20 Threaded Mount
2. Window for Vertical Beam Laser
3. Window for Horizontal Beam Laser
4. Pendulum / Transport Lock
5. Window for Up Beam Laser (SCL-D only)
6. 5/8 - 11 Threaded Mount
Window for Down Beam Laser (SCL-D only)
7. Keypad
8. Battery Cover
Figure B -
Keypad Confi gurations
Figure C -
Laser Tool Battery Location
8. Battery Cover
9. Batteries - 3 x "AA"
Figure D -
Threaded Mounts
1. 1/4 - 20 Threaded Mount
6. 5/8 - 11 Threaded Mount
Figure E -
Laser Tool on Tripod / Attachment
10. Center Screw Thread
11. Center Screw Knob
L A S E R R A D I AT I O N - D O N O T
S TA R E I N T O T H E B E A M O R V I E W
D I R E C T LY W I T H
O P T I C A L I N S T R U M E N T S
C L A S S 2 L A S E R P R O D U C T
Max Output ≤ 1 mW @ 630 - 670 nm
77-320 / 77-321