Page 1
Compliance Legal This table is for contact information and internal approval only. If certain reviewers are not necessary insert “NA” under name. Engineering responsible for Compliance review coordination. Product Brand: Stanley Product Region: North America FatMax DeWALT Black + Decker...
Page 2
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX This page should be used for desired imagery direction.
Smart Measure Pro app can also assist in estimating materials for many different job applications. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth®, SIG, Inc. and any use of such marks by Stanley is under license. Other trademarks and trade names are those of their respective owners.
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX DO NOT remove any warning label(s) on the housing. This instrument must only be used for tasks as outlined in the Product Manual. ALWAYS make sure that any bystanders in the vicinity of use are made aware of the dangers of looking directly into the laser beam.
Page 5
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX FCC Information Smart Measure Pro Model: STHT77366 Bluetooth Information FCC ID: 2ACBG3000 IC ID: 11952A-3000 FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:...
NOTE: While the unit is charging, the LED indicator will flash green. When charging is complete, the LED indicator will be solid green. The Bluetooth® device will fully recharge in 4 hours or less. Supported Devices Stanley Smart Measure Pro currently supports the following: Apple iOS iOS 8.0 or later Google Android v4.4 or later...
Page 7
1. The Smart Measure Pro app is available for download from the App Store or Google Play. 2. On your device, launch the App Store or Google Play. 3. Within the search box, search for Stanley Smart Measure Pro 4. Follow the instructions to download and install the app on your device.
Page 8
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX Pairing Your Smart Measure Pro NOTE: The LED indicator shows the status of your Smart Measure Pro: Blue flashing: Smart Measure Pro discoverable over Bluetooth Blue on: Smart Measure Pro connected to device Green flashing: Smart Measure Pro charging Green on: Smart Measure Pro fully charged Off: Power off...
Page 9
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX 4. If the measurement changes at the point where the crosshair moves on and off the vertical edge, your laser is correctly aligned. If this does not happen at the correct point, tap on ➌...
Page 10
Manual Development Template GT&S Tech Docs Graphics Req #: XXXX The whole object must be on the same surface or plane as explained above. Ensure the crosshair is on a solid surface and not on a window or hole. ...
STANLEY will repair without cost, any STANLEY product found to be defective, including parts and labor charges, or at STANLEY’s option, will replace such tools or refund the purchase price, less the amount for depreciation, in exchange for the defective tool. THIS LIMITED WARRANTY EXCLUDES ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Page 12
STANLEY Lasers are covered by: 30-Day Money Back Guarantee. If you are not completely satisfied with the performance of your STANLEY Laser for any reason, you can return it within 30 days from the date of purchase with a receipt for a full refund.