Advertisement
The electrode pins are very sharp. Handle instrument carefully. Keep pins covered when not in use.
The Stanley Moisture Meter detects moisture in wood and common building materials including, but not limited to, drywall, plaster, concrete and cement board.
Display | LCD with dual measuring scales With green Backlight |
Range, Wood | 6 to 44% ± 2% |
Range, Building Materials | 0.2 to 2.0% ± 0.1% |
Auto Power Off | 3 minutes |
Operating Temperature | 32° to 122°F (0 to 50°C) |
Operating % Humidity | 80% Max. Relative Humidity |
Power Supply | (3) CR-2032 Button Cells |
Electrode Pins | (2) 0.3" (8mm), |
Accessories | Replaceable Carry Pouch w/ Belt Clip |
If the display is not at 44% or the battery icon appears on the LCD, replace the batteries.
If the reading is not within the limits, the unit may require repair.
Push in 1, Then lift door 2, 3 push in on tab and battery will pop up.
One Year Warranty
Deficient products will be repaired or replaced, at Stanley Tools' option, if sent together with proof of purchase to:
Stanley UK Sales Limited,
Gowerton Road,
Brackmills,
Northampton
NN4 7BW
This Warranty does not cover deficiencies caused by accidental damage, wear and tear, use other than in accordance with the manufacturer's instructions or repair or alteration of this product not authorized by Stanley Tools. Repairs or replacement under this Warranty does not affect the expiry date of the Warranty.
To the extent permitted by law, Stanley Tools shall not be liable under this Warranty for indirect or consequential loss resulting from deficiencies in this product.
This Warranty may not be varied without the authorization of Stanley Tools.
This Warranty does not affect the statutory rights of consumer purchasers of the product.
This Warranty shall be governed by and construed in accordance with the laws of England and Stanley Tools and the purchaser each irrevocably agrees to submit to the exclusive jurisdiction of the courts of England over any claim or matter arising under or in connection with this Warranty.
The customer is responsible for the correct use and care of the instrument. Moreover he is completely responsible for checking the job along its prosecution, and therefore for the calibration of the instrument.
Calibration and care are not covered by Warranty.
Subject to change without notice
©2009 THE STANLEY WORKS:
www.stanleyworks.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the 77-030 that isn't answered in the manual? Leave your question here.