Kelvinator KSV80HRD Installation Manual page 11

Installation of Dred network cable
Installation instruction of Dred network cable
Insert network cable tightly as shown in the fig.
For 2.5kW and 3.5kW is as below:
Clasp of RJ45 plug of network cable shall aim at the notch of RJ45
terminal to be installed. The clasp shall be towards outside as
shown in the fig.
For 5.2kW is as below:
Clasp of RJ45 plug of network cable shall aim at the notch of RJ45
terminal to be installed. The clasp shall be towards inside as shown
in the fig.
For 7.0kW and 8.0kW is as below:
Clasp of RJ45 plug of network cable shall aim at the notch of RJ45
terminal to be installed. The clasp shall be towards left as shown in
the fig.
Bundle the Dred network cable at the wire-fixing hole of electric
box with cable tie.
For 2.5kW and 3.5kW is as below:
For 5.2kW is as below:
For 7.0kW and 8.0kW is as below:
Dred network cable Installation
11