Connecting The W52 Cordless Phone Base Station - Yealink W52 Owner's Manual

Two Rechargeable Batteries
Check the package before installation. If you find anything missing, contact your system administrator.

Connecting the W52 Cordless Phone Base Station

You have two options for power and network connection of the base station. Your system administrator will advise
you which one to use.
• AC power (Optional)
• Power over Ethernet (PoE)
If you require additional information or assistance with your new phone, contact your system administrator.
Packaging Contents
TThe following components are included in your W52 Cordless Phone/W52 Cordless Base packages:
NOTE:
Please pay attention to the radio coverage of the base station. It is up to 900 ft in unobstructed
outdoor areas and up to 150 ft inside buildings.
Set up the base station and the charger cradle at a central location on a flat, non-slip surface in
your house or apartment.
AC Power (Optional)
To connect the AC power:
1. Connect the DC plug on the power adapter to the DC5V
port on the base station and connect the other end of
the power adapter into an electrical power outlet.
2. Connect the supplied Ethernet cable between the
Internet port on the base station and the Internet port
in your network or the switch/hub device port.
User Guide for the W52 Cordless Phone
Ethernet Cable
GETTING STARTED
Belt Clip Quick Start Guide
Quick Start Guide
8