Call Mute
Press
during a call to mute the call.
Press
again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press the Options soft key during a call, and select Hold.
To resume a call, do one of the following:
If there is only a call on hold, press the Resume soft key.
If there are two calls on hold, press the Resume soft key to resume the current call,
press the Swap soft key to swap between the two calls.
Call Transfer
You can transfer a call in the following way:
1. Press the Options soft key during a call, and select Transfer.
2. Enter the number you want to transfer the call to.
3. Press
or the OK key to dial out.
4. Press the Transfer soft key after the call is answered.
Call Forward
To enable the call forward feature on a specific line:
1. Press the OK key to enter the main menu, and select Call Features->Call Forward.
2. Press
or
to highlight the desired line, and press the OK soft key.
3. Press
or
to highlight the desired forwarding type, and press the OK soft key.
Always----Incoming calls are forwarded immediately.
Busy----Incoming calls are forwarded when the handset is busy.
No Answer----Incoming calls are forwarded if not answered after a period of time.
4. Select Enabled from the Status field.
5. Enter the number you want to forward the incoming calls to in the Target field.
6. Press
or
to select the desired ring time to wait before forwarding (only for No
Answer Forward) in the After Ring Time field.
7. Press the Save soft key to accept the change.
Configuring your Phone
IP DECT Phone
Quick Site Guide
W52
Need help?
Do you have a question about the W52 and is the answer not in the manual?
Questions and answers