Page 3
What’s in the box? Yealink W52 Wireless DECT Phone W52 Base Parts A. 1 Base Station C. 1 Ethernet Cable B. 1 Power Adapter D. 1 Quick Start Guide Quick Start Guide W52 Handset Parts A. 1 Handset C. 1 Power Adapter B.
Guided Setup Connect Cables Please follow the diagram to install your phones. Once plugged in, the phone will automatically download its configuration and start to work after a few minutes. Connecting the Cordless Base: Setting up the Cordless Handsets: 1. Open the box and remove 1.
Handset Registration If this is your initial order of Yealink W52 handsets and base: • Your new Handsets have been pre-registered to your new Base. Please continue to the next page to setup your voicemail box. If this is an order for additional or replacement equipment: •...
Page 6
Voicemail Box Setup RECORDING YOUR PERSONAL VOICEMAIL GREETING 1. Press & hold 1 on your keypad. -OR- 1. Dial your extension number and press the OK key. -And Then- 2. Enter the default PIN of 0000. 3. Select option 8 for User Options. 4.
Page 7
LOGGING INTO YOUR VOICEMAIL BOX VIA THE WEB 1. Go to www.intermedia.net/ login/voice 2. Enter your Phone Number and PIN/Password 3. Click LOGIN...
Page 8
Features 1. Earpiece Outputs audio during a phone call. 2. LCD Screen Shows call information, handset status icons, prompt messages, etc. 3. Soft Keys Labeled automatically to identity their context-sensitive features. 4. Speakerphone Key Switches between the earpiece and speakerphone modes. Answers an incoming call.
Page 9
9. Redirect Key Transfers a call to another party. 10. Microphone Moves the cursor. Picks up audio during earpiece Acts as shortcuts. and hands-free calls. Scrolls through the displayed 11. Mute Key information. Toggles Mute feature on or off. 12. Pound Key Enters the pound symbol.
Page 10
Displaying Information on the LCD Screen The idle screen may be shown as below: Status The LCD screen is divided into three Line parts: Status Line, Text Line and Softkey Line. Text Line THE INFORMATION SHOWN IN THE STATUS LINE: 1.
SIGNAL STRENGTH ICON INSTRUCTIONS Weak to strong: Icons appearing on the LCD screen are described in the following table: Anonymous Call No reception: Anonymous Call Rejection Missed Call Voice Mail Keypad Lock BATTERY STATUS Silent Mode The battery status displays on the top Do Not Disturb right-hand corner of the LCD screen: Call Forward...
Commonly Used Features PLACING OUTGOING CALLS When the phone is not in use: 1. Pick the Handset up from the Charging Cradle. 2. Dial an extension number or telephone number. 3. Press the green Call button. When you are already on a call: 1.
ENDING A CALL Press the red End Call button. HOLD Placing a Call On Hold: 1. While on a call, press the Options softkey. 2. Use the down arrow to highlight Hold and press the Ok softkey. The call is now on hold.
MUTE 1. While on a call, press the Mute button on the Handset. 2. To un-mute the call, press the Mute button again. VOICEMAIL 1. Press and hold the 1 key on the Handset keypad or dial your phone’s extension or phone number. 2.
SPEAKERPHONE While the phone is not in use: • Press the Speakerphone button to activate the speakerphone and get dial tone for an outbound call. While on a call on the Handset / Headset • Press the Speakerphone button to continue the current call on the speakerphone.
Page 16
We are here to help. www.intermedia.net/knowledgebase/voice voicesupport@intermedia.net 1.877.880.0055 Yealink W52-QS-001 * YEALINK W52-QS-001* www.intermedia.net...
Need help?
Do you have a question about the W52 and is the answer not in the manual?
Questions and answers