How To Assemble And Furnish Your Hp Cleaner - Kranzle quadro 1200 TS Operating Manual

How to assemble and furnish your high pressure cleaner
Remove the screw from the drive shaft of the hose
drum. Unpack the crank and insert it onto the
hexagon head. Tighten the crank again with the
screw.
To check the oil level, loosen the oil
cover screw and take out the oil dip
stick. The oil level must be between
the two markings.
To control the high pressure cleaner
put
1. the foot against the tilt bases and
then pull the device
2. towards you.
11