The nozzle is blocked!
No water but the gauge shows full pressure !
Rinse the hose through
first.
remove the lance and clean
the nozzle.
Insert pointed object
into the hole and pull
the cap back!
Check visually whether the
nozzle is clean.
20
Small repairs ...
You should now have a
powerful stream
Straighten a paper
clip and clean the nozzle.
of water,
Using the flat spray lance you
only have to clean the front
nozzle.
but if you
only get a few
drops of water
from the
lance
Now it works as well
as before.