Table of Contents
Advertisement
Overview and Features
NonStop NS-Series Servers
An M8201R Fibre Channel to SCSI router must be used to connect the tape drive to
the Fibre Channel ServerNet adapter (FCSA) on the HP Integrity NonStop NS-series
server. For more information, refer to the M8201R Fibre Channel to SCSI Router
Installation and User's Guide and the Fibre Channel ServerNet Adapter Installation and
Support Guide.
Figure 1-3. Configuration for the Integrity NonStop NS-Series Server
NonStop
NS-Series
Server
Features
The DAT72 tape drive can store 36 GB of data per DAT72 cartridge and up to 72 GB of
data in compressed mode (assuming a 2:1 compression factor). The tape drive has
both read and write heads and can perform read-after-write (RAW) data checking.
Specifications
For the tape drive specifications, refer to
Fiber Cable
SCSI Cable
5243 Tape Drive Installation and User's Guide —542758-003
Fibre Channel to SCSI Router
Appendix A,
Specifications.
1 -3
NonStop NS-Series Servers
Tape Drive
Advertisement
Table of Contents
