Table of Contents
Advertisement
1
Overview and Features
This section includes:
Overview
Features
Overview
The 5243-2SE tape drive is designed for file backup and archive applications. It
contains two independent DAT72 tape drives.
The tape drive unit mounts into a telco rack and has built-in power-on-self-test (POST)
diagnostics.
The tape drive uses DAT72 tape drives and is designed to use a 170-meter DAT72
tape cartridge. The tape drive is also backward compatible with the DDS-3 tape format.
It is not backward compatible with DDS-2 or DDS-1 tape formats. The unit is
considered a field replaceable unit (FRU) and can only be installed or replaced by
qualified personnel trained by HP.
NonStop S-Series Servers
The tape drive connects to a
NonStop S-series server by a SCSI cable.
NonStop NS-Series Servers
An M8201R Fibre Channel to SCSI router must be used to connect the tape drive to
the Fibre Channel ServerNet adapter (FCSA) on the HP NonStop NS-series server.
For more information, refer to the M8201R Fibre Channel to SCSI Router Installation
and User's Guide and the Fibre Channel ServerNet Adapter Installation and Support
Guide.
Features
The DAT72 tape drive can store 36GB of data per DAT72 cartridge and up to 72GB of
data in compressed mode (assuming a 2:1 compression factor). The tape drive has
both read and write heads and can perform read-after-write (RAW) data checking.
Specifications
For the tape drive specifications, refer to
5243-2SE Tape Drive Installation and User's Guide —542757-003
1-1
1-1
ServerNet/DA
IOMF2 CRU, or PMF CRU
,
Appendix A,
1 -1
Specifications.
on the
Advertisement
Table of Contents
