Security Menu; Password; Password Change; Text Display - Panasonic PT-LB75VU Operating Instructions Manual

SECURITY menu

Navigating through the MENU (
select SECURITY from the main menu and then
select the required item from the sub-menu.
When you apply to the
z
the first time, you will be asked to perform the
password operation. Input the initial password by
pressing ▲►▼◄▲►▼◄ buttons in order and
then press the ENTER button.
Set the selected item with◄►buttons.
z
Remote control
Note
Perform the above operation after the
z
menu is displayed.
If you have changed the password, input the new
z
password and press the ENTER button.

PASSWORD

You can activate the security system and the
password operation will be asked to perform when
projecting mode started.
Change setting
OFF Deactive
ON Active
Remarks
PASSWORD is set to OFF by default and when
z
initialised.
Change your password regularly. Do not use a
z
simple password that is too easy to guess.
Unless you perform the correct password operation,
z
all of the button controls will be disabled except the
POWER button.
page 27),
Æ
SECURITY menu for
Control panel
SECURITY
Change setting
SECURITY menu

PASSWORD CHANGE

You can change the password operation to your original.
1 ) Press▲▼◄►buttons to change the
password.
(Up to eight button operations can be set.)
2 ) Press the ENTER button.
3 ) Input the password again and press
the ENTER button.
Remarks
The entered password operations will appear as
z
asterisks in the box.
If a series of button operation is incorrect, you will
z
be asked to perform again.

TEXT DISPLAY

You can set your original text to display regularly at
the bottom of the projected image while projecting.
Change setting
OFF Deactive
ON Active

TEXT CHANGE

You can enter your original text to be displayed when
TEXT DISPLAY is turned ON.
1 ) Press▲▼◄►buttons to select the required
character and press the ENTER button.
(You can input up to 22 characters.)
To delete all the entered characters, move the
cursor to ALL DELETE and press the ENTER
button. To delete a character, press the DEFAULT
button or move the cursor to the required
character then press the DEFAULT button.
TEXT CHANGE
OK
2 ) Press▲▼◄►buttons to select OK and
press the ENTER button.
Select CANCEL or press the MENU/RETURN
button to return to the previous menu without
setting.
Change setting
ALL DELETE
SPACE
CANCEL
E
NGLISH - 43