Enlarging The Image; Using An Assigned Function - Panasonic PT-LB75VU Operating Instructions Manual

Remote control operation

Enlarging the image

You can enlarge the projected image down to a cen-
tered area for emphasizing within the range of 1× to 2×.
Press
Press the RETURN button to escape.
Button functions in digital zoom
J
mode
+ button: zooms in
- button: zooms out
Press "-"
Press ▲▼◄► to shift the center point.
Remarks
When the COMPUTER signal is projected, the
z
enlargement range will be changed to 1× to 3×.
When FRAME LOCK in the POSITION menu is set
to ON, the enlargement range is 1× to 2×. However,
the enlargement range is 1× to 3× if FRAME LOCK
is set to OFF. (
Æ
When the input signal is changed while the
z
DIGITAL ZOOM is activated, the DIGITAL ZOOM
mode will be cancelled.
While the DIGITAL ZOOM is activated, the AUTO
z
SETUP, FREEZE, DEFAULT, INDEX-WINDOW
and FUNCTION (except when AV MUTE is
assigned) buttons are not available.
E
26 - NGLISH
button.
Press "+"
page 34)

Using an assigned function

You can select a useful function from the list and
assign it to the FUNCTION button for a short-cut.
Press button.
1 ) Press the MENU button of the control
panel or remote control to display the
on screen menu (main menu, sub-
menu or detailed menu) .
For the menu operation, see "Navigating through
the MENU". ( page 27)
Æ
2 ) Press and hold the FUNCTION button
of the control panel or remote control
for 3 seconds or more.
When not using the FUNCTION button
Q
1 ) Select DISABLE in this menu
(FUNCTION BUTTON in the
PROJECTOR SETUP menu).
2 ) Press the ENTER button.
3 ) Select OK.
4 ) Press the ENTER button.
Remarks
For details, see "FUNCTION BUTTON" in the
z
"PROJECTOR SETUP menu". ( page 41)
Æ