Power And Power Lock Indicators - Panasonic PT-LB75VU Operating Instructions Manual

Switching the projector on/off

POWER and POWER LOCK indicators

The POWER indicator informs you of the status of the power and the POWER LOCK indicator shows the status
of the RELEASE button. When the TEMP indicators are flashing, the POWER and POWER LOCK indicators will
light red and you cannot switch the projector on.
POWER LOCK indicator status
J
Indicator status
No illumination or flashing
Red
POWER indicator status
J
Indicator status
No illumination or flashing
Red
Green
Orange
Remarks
When the power is turned off, the internal fan is cooling the lamp by internal power supply.
z
The power is switched on again while cooling the lamp and recovering to the projection mode. Recovery may
z
take a while.
Even while the power is turned off (when
z
power of about 0.9 W is consumed.
E
20 - NGLISH
POWER indicator
POWER LOCK indicator
No power is supplied.
z
The RELEASE button is pressed and the POWER button is unlocked while
z
the power is on.
Lit The POWER button is locked.
Flashing Pressing the locked POWER button.
No power is supplied and the internal cooling fan is not operating.
The power is turned off (when STANDBY MODE is set to ECO).
Lit
If the POWER button is pressed, projection starts.
Flashing The power is turned off (when STANDBY MODE is set to NORMAL).
Flashing The power is on and preparing for projection.
Lit The projector is projecting.
No power supply and the internal fan is cooling the lamp by internal power
Lit
supply.
The power is switched on again while cooling the lamp and recovering to the
Flashing
projection mode. Recovery may take a while.
STANDBY MODE is set to ECO, the POWER indicator is lit in red),
Status
Status