Display Option Menu; On-Screen Display; Closed Caption Setting - Panasonic PT-LB75VU Operating Instructions Manual

Commercial use
Table of Contents

Advertisement

DISPLAY OPTION menu

DISPLAY OPTION menu
Navigating through the MENU (
select DISPLAY OPTION from the main menu
and then select the required item from the
sub-menu.
Set the selected item with◄►buttons.
z
Remote control

ON-SCREEN DISPLAY

You can set the on-screen display.
Change setting
INPUT GUIDE
J
When you change the input method, the guidance
appears in the upper right corner of the screen. The
following display methods are available.
Display the input method by graphic.
DETAILED
The INPUT GUIDE will go out after
10 seconds without any operation.
OFF
Turn off the guidance.
Display the input method by text.
SIMPLE
The INPUT GUIDE will go out after
5 seconds without any operation.
Remarks
If you select the computer terminals which have no
z
signals while INPUT GUIDE is set to DETAILED,
the computer connection guidance will be displayed.
If you want to turn off the guidance, select SIMPLE
or OFF.
Computer connection guidance
Q
You can switch the signals which output from the
COMPUTER1/COMPUTER2 terminal by pressing
the following computer key commands.
Image output
Manufacturer
selection
command
Panasonic
+
NEC
Acer
HP
+
SHARP
TOSHIBA
lenovo
+
SONY
E
36 -
NGLISH
page 27),
Æ
Control panel
Change setting
Image output
Manufacturer
selection
command
DELL
+
EPSON
+
FUJITSU
Apple
Remarks
The key commands are depending on the
z
manufacturers. Please refer to the instructions
which were provided with the computers for more
detailed information.
OSD DESIGN
J
You can change the background of the on-screen
menu (OSD).
TYPE1
Semi transparent black
TYPE2
Solid blue
TYPE3
Semi transparent dark blue
WARNING MESSAGE
J
You can choose to display or not to display the
warning massages.
ON
Warning messages will be displayed
OFF
No display
Note
When the
WARNING MESSAGE is set to OFF, use
z
the projector with utmost care due to the most of
warning messages will not be displayed.

CLOSED CAPTION SETTING

If the input signal contains closed captions, you can
turn on the feature and switch the channels.
CLOSED CAPTION
J
OFF
Deactive
ON
Active
MODE
J
CC1 - 4
Change the channels CC1 - 4
Remarks
VCR with TBC (Time Base Corrector) function is
z
recommended for video cassette tapes.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents