Remote Control Operation; Capturing An Image; Stopping The Projection Temporarily; Switching The Input Signal - Panasonic PT-LB75VU Operating Instructions Manual

Remote control operation

Remote control operation

Capturing an image

You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
Press
Press the FREEZE button again to escape.
Stopping the projection
temporarily
You can stop the projection and audio sound through
the projector temporarily.
Press
Press the AV MUTE button again to escape.

Switching the input signal

You can switch the input signal corresponding to the
computer to be projected.
COMPUTER
J
Press
Press the COMPUTER button to cycle through the
options.
COMPUTER1
COMPUTER2
E
24 - NGLISH
button.
button.
button.
Signal input to COMPUTER1 IN
terminal
Signal input to COMPUTER2 IN
terminal
NETWORK
J
(PT-LB90NTU only)
Press button.
Signal transmitted by "Wireless
NETWORK Manager" from computer through
network (
VIDEO
J
Press button.
Press the VIDEO button to cycle through the options.
Signal input to S-VIDEO IN
S-VIDEO
terminal
VIDEO Signal input to VIDEO IN terminal
If INPUT GUIDE under the ON-SCREEN DISPLAY
in the DISPLAY OPTION menu is set to DETAILED
( page 36), you can confirm the selected input
Æ
terminal in the graphical input terminal guide at the
upper right of the screen. (Highlighted in yellow is the
selected terminal.)
You can change the input with ▲▼◄► buttons.
It may take some time to change the image after the
input signal is switched.
Note
Input a compatible signal shown in the "List of
z
compatible signals". (
Æ
Remarks
For the input terminals, see "Connections".
z
( page 17)
Æ
If no operation is performed, the input guide
z
disappears automatically.
If the INPUT SELECT button on the control panel is
z
pressed, the input is switched in the following order.
( page 12)
Æ
COMPUTER1 COMPUTER2
NETWORK *
1
*1: PT-LB90NTU only
page 45)
Æ
page 52)
S-VIDEO
VIDEO