Pegs; Streamers, Pads & Bags; Handlebar Accessories - Dynacraft BMX Owner's Manual

13. PEGS

To install pegs, begin by hand threading the
pegs onto the axle. (See Figure 1.) Use a long
screwdriver through the hole in the peg as
leverage to tighten the peg fully on the axle.
(See Figure 2.)
14. STREAMERS, PADS & BAGS
STREAMERS
– Insert each streamer into the hole in the end of each handlebar grip.
– Ensure the streamer is fully inserted so it does not come loose.
PADS
– For handlebar and top tube pads, remove the cover and place the foam pad over the
tube. Wrap the cover around the pad and secure with the hook and loop closure.
– For stem pads, wrap the cover around the stem and secure with the hook and loop
closure.
HANDLEBAR BAGS
– On the back of the bag, open the outer flap and inner hook and loop straps. Secure
the bag to the handlebar with the inner hook and loop straps. Place the outer flap
over the inner straps and secure with the hook and loop closure.

15. HANDLEBAR ACCESSORIES

WARNING:
Keep small parts away from children during assembly.
To install handlebar accessories, simply remove the mounting screws, place the
accessory clamp around the handlebar, and re-install the mounting screw. Tighten the
screw, taking care not to over tighten which can damage the clamp.
WARNING:
All accessories must be securely fastened, and positioned in such a way
that they do not interfere with the safe operation of the bicycle.
1 2
NOTE: Your bicycle may have different styles
of accessories than the ones pictured, but
they mount the same way.
C
27