Scan Sensitivity Setting - Fm - Roberts Sovereign User Manual

Scan sensitivity setting - FM

Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to fi nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.
1. Press the On/Off button to switch on your radio.
2. If needed, press and release the DAB/FM button until the FM mode
is selected.
3. Press and hold the Info button until the Advanced FM menu shows
on the display and then release the button.
4. Rotate the Tuning control until ' FM Scan Zone' shows on the display.
Press and release the Tuning control.
5. Rotate the Tuning control to switch between Local and Distant options
on the lower line of the display. The current setting will be marked
with an asterisk. The Distant option will allow the radio to fi nd weaker
signals when scanning.
6. Press and release the Tuning control to confi rm your selection. The
radio will then revert to the normal information display. The Local or
Distant setting is stored in the radio and remains in force until changed
or until a System Reset.
Note: The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.
15
FM Scan Zone
1
FM Scan Zone *
2
Local
FM Scan Zone
3
Distant
4-6
FM