Displaying And Maintaining Track Object; Track Configuration Examples - H3C S5120-EI Series Operation Manual

Ethernet switches

Hide thumbs Also See for S5120-EI Series:

Table of Contents

For the configuration of Track-Static Routing collaboration, the specified static route can be an

existent or nonexistent one. For an existent static route, the static route and the specified Track

object are associated directly; for a nonexistent static route, the system creates the static route and

then associates it with the specified Track object.

The Track object to be associated with the static route can be a nonexistent one. After you use the

track command to create the Track object, the association takes effect.

If a static route needs route recursion, the associated Track object must monitor the next hop of the

recursive route instead of that of the static route; otherwise, a valid route may be considered

For details of static route configuration, refer to Static Routing Configuration in the IP Routing

Displaying and Maintaining Track Object(s)

Display information about the

specified Track object or all

Track objects

Static Routing-Track-NQA Collaboration Configuration Example

Network requirements

The next hop of the static route from Switch A to Switch C is Switch B.

Configure Static Routing-Track-NQA collaboration on Switch A to implement real-time monitoring

of the validity of the static route to Switch C.

Figure 1-2 Network diagram for Static Routing-Track-NQA collaboration configuration

display track

{ track-entry-number | all }

Use the command...

Available in any view

Chapters

Table of Contents