Troubleshooting Ipv6 Basics Configuration - H3C S5120-EI Series Operation Manual

Troubleshooting IPv6 Basics Configuration

Symptom
The peer IPv6 address cannot be pinged.
Solution
Use the display current-configuration command in any view or the display this command in
system view to verify that IPv6 is enabled.
Use the display ipv6 interface command in any view to verify that the IPv6 address of the
interface is correct and the interface is up.
Use the debugging ipv6 packet command in user view to enable the debugging for IPv6 packets
to help locate the cause.
1-25