Identifying Controls
Main unit
1
2
1 M ain power switch (○ / I)
Switches the main power ON (I) / OFF (
●
Turning ON/OFF the <Main power switch> is the
same as plugging or unplugging the power cable
plug. Switch the <Main power switch> ON (I), and
then turn the power ON / OFF with the remote
control or <Power button (Unit)>
2 Power Indicator / Remote control sensor (Back of
the unit)
The Power Indicator will light.
When the power of the unit is ON (Main power
switch: ON (I))
●
Picture is displayed: Green
●
Power OFF (standby):
●
When [General settings]-[Eco mode] is set to
[low power standby]:Red
●
When [General settings]-[Eco mode] is set to
[normal]:Orange
When the power to the unit is OFF (Main power
○
switch: OFF (
)): No light
Note
●
When the power indicator is orange, power
consumption during standby is larger than that of
when the power indicator is red.
1 [
Use this button to turn the Display on or put it into
standby.
○
).
2 [MUTE] button
Switch audio mute ON/OFF.
3 [INPUT] button
Choose the input source.
4 [
Increase the adjustment while the OSD menu is
on, or increase the audio output level when the
OSD menu is off.
5 [
Decrease the adjustment while the OSD menu is
on, or decrease the audio output level when the
OSD menu is off.
6 [
Move the highlight bar up to adjust the selected
item while the OSD menu is on.
7 [
Move the highlight bar down to adjust the selected
item while the OSD menu is on.
8 [MENU] button
Return to the previous menu while the OSD menu
is on, or to activate the OSD menu when it is off.
MUTE
INPUT
1
2
3
4
] button
●
Used as [ENTER] in the On-Screen-Display menu.
] button
] button
] button
] button
MENU
5
6
7
8
13
English