Adjusting The Pixel Clock - Panasonic PT-D995U Operating Instructions Manual

Operating the Main Menu (Cont.)

Adjusting the Pixel Clock

Remote control unit
PAGE BACK button
Main menu
Submenu item (PIXEL CLOCK)
The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
A dim screen could be caused by insufficient adjustment of
brightness and contrast. Before adjusting phase, make sure
that brightness and contrast are correctly adjusted.
The pixel clock should be adjusted mainly for computer-related inputs.
(Normally, it does not need to be adjusted for video inputs.) If a wide
stripe appears on the screen, adjust the lateral size of video image
and the display area (tracking adjustment) so the stripe disappears.
MENU/ENTER
Also, if text on the video screen appears flickering or dim, make
button
adjustment so it becomes clear (phase adjustment).
Press the MENU/ENTER button.
The main menu appears on the screen.
Select "PIXEL CLOCK" with the cursor
button
The selected item (displayed in text) is shown in magenta color
on the screen.
Press the MENU/ENTER button.
Cursor buttons
The submenu items of the PIXEL CLOCK menu appears on the
screen.
Adjust "TRACKING" and "PHASE" with
the cursor buttons.
Adjust the tracking and phase of the video screen being
projected. To adjust the phase, first check for correct tracking
adjustment.
* To reset to the factory-set adjustment values, press the remote
control's PRESET button.
Tracking and phase are reset to the factory-set adjustment values.
To return to the main menu, press the PAGE
BACK button. To finish the main menu, press
PAGE BACK again.
To finish the menu display from the submenu display (PIXEL
CLOCK menu), press PAGE BACK twice.
.
or
(PIXEL CLOCK menu)
Adjustment item Button
The screen shrinks laterally
(right-to-left). (-255
TRACKING
The screen extends laterally
(right-to-left). (-255
Set to a position where text
appears clear.
PHASE
(-127
(-127
Adjustment content
0 +255)
0 +255)
0 +127)
0 +127)
39