Changing The Color System - Panasonic PT-D995U Operating Instructions Manual

Operating the Main Menu (Cont.)

Changing the Color System

Remote control unit
PAGE BACK button
Main menu
Color system (DECODER) display
When computer-related signal is input, the display of the
color system is changed to gray color, making operation
impossible. When video signals from AV devices are input,
the item for the color system can be set.
AUTO is set for the color system when the projector is shipped from
the factory. Normally, use it in AUTO. If operation in AUTO is unstable
such as with color not being shown, set to a dedicated color system
accordance with the color system of the signal being input.
in
MENU/ENTER
button
Press the MENU/ENTER button.
The main menu is shown on the screen.
Select "DECODER" with the cursor
button
The selected item (displayed in text) is shown in magenta color
on the screen.
Set the color system with the cursor
button
Cursor buttons
Each time you press the cursor button
changes as follows.
About automatic signal identification
AUTO is selected when shipped from the factory. In AUTO, the color system
(DECODER) of the signal being input is automatically identified and indicated
in ( ). Refer to the main menu display.
If operation in AUTO is unstable such as with color not being shown, set to a
dedicated color system in accordance with the color system of the signal
being input. When the dedicated color system is set, be careful as automatic
identification does not work.
To finish the main menu, press the PAGE BACK
button.
or
•
or
•
: Forward / : Backward
Normally, set to AUTO. The color
AUTO
system of a signal being input is
automatically identified.
Dedicated to NTSC.
NTSC
Dedicated to NTSC4.43.
NTSC4.43
Dedicated to PAL.
PAL
Dedicated to SECAM.
SECAM
or , the color system
37