Table of Contents
Advertisement
Controls and Features (cont.)
Left-hand side
AC IN (power input) terminal
This is the power input terminal where the supplied power
cord is connected. For details, refer to page 26.
MAIN POWER switch
This is the main power switch. When it is turned on, the
projector goes into stand-by state, and the STAND BY
indicator on the control panel comes on.
[ I ]
ON
: The main power turns on.
[ ]
OFF
: The main power turns off.
Connector panel
For details, refer to "Connector Panel" on page 13.
Adjustable foot (for horizontal angle adjustment)
It is set at the shortest position when shipped from the
factory Turn the foot to make the projector level. Adjustment
can be made in the range of + 1.5° and – 1.5° from the
horizontal position.
+1.5°
-1.5°
Extend Shorten
9
Advertisement
Table of Contents
